DRIWON Grade 1 door closers with built-in delayed action: the door pauses before it starts to close, giving people with wheelchairs, walkers, carts, beds or strollers time to pass. Adjustable, hydraulic and UL listed for rated assemblies.
For hospitals, senior living, schools, libraries, hotels, loading areas and any door used with carts or mobility aids.
Adjustable hold before closing
Tested beyond 2 million cycles
With delayed action & positive latch
On rated door assemblies




A standard closer starts closing the door as soon as it is released. A delayed action door closer has an extra hydraulic valve that greatly slows the first part of the closing cycle, so the door pauses near the open position for several seconds before the normal closing sweep begins. It does not lock the door open: the door always closes on its own.
Delayed action adds time before the closing sweep starts; it does not replace the ADA closing speed rule. Under the 2010 ADA Standards, the door must still take at least 5 seconds to move from 90Β° to 12Β° from the latch. Many facilities set 5β15 seconds of delay on primary corridors, depending on the users.
Delayed action is permitted on fire-rated doors when the closer is listed for that use, because the door still closes and latches by itself. A hold-open is different: it keeps the door open indefinitely and is only allowed on fire doors when released automatically by the fire alarm. The DRIWON DN-9500 is UL listed and 3-hour fire rated on rated assemblies; confirm the listing for each opening.
Both models. The cast iron DN-9500 is the extra heavy duty choice for corridors, stairs and high-abuse doors; the aluminum DN-8220 suits interior doors with moderate traffic.
Read more: ADA door closer requirements and door closers for senior living.
| Model | DRIWON DN-9500 extra heavy duty commercial door closer |
|---|---|
| Certification | ANSI/BHMA A156.4 Grade 1; UL listed |
| Fire rating | 3-hour fire rated when installed on a rated door assembly |
| Power size | Adjustable 1β6 |
| Door weight | 44β440 lbs (20β200 kg) |
| Door width | 23"β59" (58β150 cm) |
| Body / arm | Extra heavy duty cast iron body, wrought steel arm, heat-treated piston |
| Control | Hydraulic, with delayed action and secure positive latch |
| Finish | Corrosion-resistant powder coat, silver or black |
Need the lighter-duty option for interior doors? See the DRIWON DN-8220 Grade 1 door closer. Full details on the DN-9500 product page.
A hydraulic valve slows the start of the closing cycle so the door pauses near the open position before it begins to close.
It is adjustable. Many Grade 1 closers allow up to roughly 30 seconds; 5β15 seconds is typical on corridors.
No. The door must still take at least 5 seconds to move from 90Β° to 12Β° from the latch. Delayed action adds time before that sweep begins.
Yes, when the closer is listed for use on the rated assembly, because the door still closes and latches on its own.
Delayed action only pauses the closing cycle; the door always closes. Hold-open keeps the door open until someone releases it and is restricted on fire doors.
Yes. Both the DN-9500 and the DN-8220 include an adjustable delayed action valve.
Equipping corridors in a hospital, senior living community or school? Contact our team for volume pricing.